Animal RFID Tag Insert Molding with Vertical Rotary Injection Molding Machine
This video shows the production process of animal RFID tags using a vertical rotary injection molding machine. Animal RFID tags are widely used in livestock identification, tracking, and traceability systems. In this application, the product requires insert molding, with embedded components placed into the mold before injection. The vertical rotary table structure allows insert loading and injection molding to work at the same time. While one station is molding, the operator can place inserts on another station, helping improve production efficiency and product consistency. For this case, the mold is designed with 8 cavities, and the cycle time is around 20 seconds. This solution is suitable for batch production of animal RFID tags, electronic components, connectors, and other insert-molded products. If you are looking for a vertical injection molding machine for insert molding applications, contact us for a suitable machine solution. Email: [email protected] WhatsApp: +86 18858085833 Website: www.deboge.com #VerticalInjectionMoldingMachine #RotaryInjectionMoldingMachine #InsertMolding #AnimalRFIDTag #RFIDTagProduction #RFIDTags #AnimalEarTag #LivestockIdentification #Traceability #InjectionMolding #PlasticInjectionMolding #VerticalMoldingMachine #RotaryTableInjectionMolding #InsertMoldingMachine #RFIDManufacturing #LivestockManagement #AutomationEquipment #IndustrialManufacturing #PlasticMolding #InjectionMoldingMachine #MoldingSolution #BatchProduction #SmartFarming #AnimalTracking #ElectronicInsertMolding
Oct 16, 2026 | Insert molding videos
Insert molding videos
Animal RFID Tag Insert Molding with Vertical Rotary Injection Molding Machine
What to Watch For
Watch the sequence, not only the finished result. Look at how the operator or automation approaches the machine, how the part or insert is positioned, where movement is constrained, and which steps happen before and after the main machine action.
If the clip shows a molding machine, also check mold access, loading position, table movement, injection direction, part removal, guarding, and visible automation boundaries. If it shows a supporting production line, use it to discuss how much of the workflow should be handled by the machine and how much should remain outside the molding cell.
Questions to Prepare After Watching
- What molded part, insert, or material behavior looks closest to your project?
- Does the workflow require fixed platen, slide table, rotary table, or a customized loading method?
- Which details still need engineering confirmation, such as mold structure, cavity count, heating, cooling, or automation?
When the Video Is Only a Reference
A video can help both sides discuss the same movement or workflow, but it is not a final machine selection by itself. Product drawings, material information, mold concept, cavity count, loading method, and target output are still needed before Deboge can review a configuration path.
If the video is close to your application, share the video link with your product details when contacting Deboge. It helps both sides discuss the same machine movement, process sequence, or automation reference.
Related Reading
Need a Video Closer to Your Application?
Send your molded product, material, mold concept, and target workflow. Deboge can share relevant video references or prepare project-specific movement notes for discussion.